no music in the game

[puzngoer]

in the game I hear no music and sounds. please help me!
without music makes the game no fun

I hear no music in all lemming games (lemmings, holiday lemmings 91-94)


(sry I can̥t good english)

LG jule

[Mr. K]

Are you running Windows XP?

Windows XP dropped most of its DOS support, including sound support.  That means that sound will not work.  You will need to play the games in a DOS emulator like DOSBox (recommended) or else install VDMSound (no link, sorry) which restores sound support to Windows XP DOS emulation. (not as recommended, but works)

[covox]

Easy way of running DOS Lemmings:

1.) Get DOSBox
2.) Place your LEMMINGS folder in your C:\ drive
3.) Make a new text file in the DOSBox directory, name it "dosbox.conf", and paste the following into it:

Code Select Expand

[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest.
#             Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the key/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.

fullscreen=false
fulldouble=false
fullresolution=original
windowresolution=original
output=overlay
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true

[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.

language=
machine=vga
captures=capture
memsize=64

[render]
# frameskip -- How many frames dosbox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
#           Supported are none,normal2x,normal3x,advmame2x,advmame3x,advinterp2x,advinterp3x,tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.

frameskip=0
aspect=false
scaler=normal2x

[cpu]
# core -- CPU Core used in emulation: simple,normal,full,dynamic.
# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
#           Setting this higher than your machine can handle is bad!
#           You can also let DOSBox guess the correct value by setting it to auto.
#           Please note that this guessing feature is still experimental.
# cycleup   -- Amount of cycles to increase/decrease with keycombo.
# cycledown    Setting it lower than 100 will be a percentage.

core=dynamic
cycles=2000
cycleup=500
cycledown=20

[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
#         probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
#              but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
# mpu401      -- Type of MPU-401 to emulate: none, uart or intelligent.
# device      -- Device that will receive the MIDI data from MPU-401.
#                This can be default,alsa,oss,win32,coreaudio,none.
# config      -- Special configuration options for the device. In Windows put
#                the id of the device you want to use. See README for details.

mpu401=intelligent
device=default
config=

[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the dosbox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
#            On auto the mode is determined by sblaster type.
#            All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.

sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
#            Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory.  In this directory
#             there should be a MIDI directory that contains
#             the patch files for GUS playback.  Patch sets used
#             with Timidity should work fine.

gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
#          For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation.

pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[bios]
# joysticktype -- Type of joystick to emulate: none, 2axis, 4axis,
#                 fcs (Thrustmaster) ,ch (CH Flightstick).
#                 none disables joystick emulation.
#                 2axis is the default and supports two joysticks.

joysticktype=2axis

[serial]
# serial1-4 -- set type of device connected to com port.
#              Can be disabled, dummy, modem, directserial.
#              Additional parameters must be in the same line in the form of
#              parameter:value. Parameters for all types are irq, startbps, bytesize,
#              stopbits, parity (all optional).
#              for directserial: realport (required).
#              for modem: listenport (optional).
#              Example: serial1=modem listenport:5000

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support (false,true,max).

xms=true
ems=true
umb=true

[ipx]
# ipx -- Enable ipx over UDP/IP emulation.

ipx=true

[autoexec]
# Lines in this section will be run at startup.
4.) Start DOSBox. You'll be at the DOS command prompt (ah the nostalgia!)

Code Select Expand

Z:\> mount c C:\LEMMINGS
Drive C is mounted as local directory C:\LEMMINGS

Z:\> c:
C:\> vgalemmi.exe


Lemmings should start. Notice on the window bar the number of Cpu Cycles is set to 2000, you need to have it like that when you -start- the game.  After the Lemmings title screen appears, you can increase this number using Ctrl+F12, and decrease it again with Ctrl+F11.

The mouse can be locked and unlocked using Ctrl+F10. Ctrl+F9 quits DOSBox, be careful!